5 Big Mistakes Most People Make With Asphalt Sealcoating Tampa Florida
Asphalt sealcoating in Tampa Florida is critical to pavement maintenance, safeguarding it from rain, shine and premature wear. It’s your ticket to beautiful, long-lasting pavement. However, improper application, poor preparation and other common mistakes can leave you with lackluster protection, costly fixes and severe damage.
Let’s explore some of the biggest mistakes people make with asphalt sealcoating in Tampa.
Is Sealcoating in Tampa Florida a DIY-Friendly Job?
Sealcoating looks like a simple job. As a result, many property owners and managers feel they can take a DIY approach to save money. However, doing so often leads to disastrous results! Tampa FL asphalt sealcoating is more complex than it seems, requiring significant planning and prep.
Tampa Florida sealcoating companies have years of experience, allowing them to do the job correctly without any issues. They also use higher quality sealers than what’s readily available at big-box stores. Pair that with the equipment they use to prepare surfaces and apply the product, and professionals can perform asphalt sealcoating better and quicker than any DIY attempt. Ultimately, their expertise will save you money in the long run and prevent avoidable mistakes.
Does Sealcoating Require Any Preparation?
Here’s another common mistake inexperienced teams make when asphalt sealing in Tampa. The product Tampa Florida sealcoating companies use to protect your pavement is an asphalt emulsion sealer. It’s a liquid product that slowly cures after application. The sealer must bond with your pavement tightly for maximum protection.
It can’t do that if your paved surfaces are full of grime! Surface preparation is a vital part of the sealcoating process, and contractors spend as much time as they need to clear trash, sweep away debris, clean up vegetation and possibly power wash your pavement. Asphalt must be clean and dry for the sealer to bond correctly. Otherwise, it’ll peel away and leave your surface susceptible to the elements.
Why Do Tampa Florida Sealcoating Companies Schedule Appointments Around the Weather?
Sealcoating in Tampa Florida needs warm, dry conditions. Every sealer has unique manufacturer recommendations covering ideal application conditions. Most need ambient and ground temperatures above 60 degrees, relatively low humidity levels and zero chance of precipitation. Rain can wash the sealer away before it cures. Meanwhile, excessively hot conditions or humidity can cause the product to cure unevenly.
Therefore, Tampa Florida sealcoating companies are mindful of the weather on application day. They also make sure the following days are ideal for curing.
Is Asphalt Sealcoating in Tampa a Fix-All Solution?
Asphalt sealing in Tampa can transform old, faded pavement into a like-new surface. However, it won’t fix all your issues. One major mistake people make is treating Tampa FL asphalt sealcoating like a gap-filler. It won’t address cracks, potholes or any other problem that needs repair.
It’s important to take care of repairs before asphalt sealing in Tampa. Any amateur service provider who tries to use sealer as a gap filler is taking the lazy route to fix cracks, and you’ll pay for that mistake later. Hire a seasoned contractor to perform repairs and give your new sealcoating a smooth surface to bond to.
Why Does Sealcoating Need Time to Cure?
Sealcoating in Tampa Florida needs 24 to 48 hours to cure. The curing process is slow, but it’s important to give the product all the time it needs. Contractors must block treated surfaces, preventing vehicles and pedestrians from using them until the sealer fully cures.
Using your pavement prematurely could result in cracking, peeling and a huge mess with tire tracking. Experienced contractors will apply at least two thin coats of sealer before giving the product ample time to cure before giving you the OK to use your pavement again.
There’s an easy way to avoid these mistakes and more–Turn to Line Striping of Tampa Bay! We’re experts in Tampa FL asphalt sealcoating, working with property owners throughout the area to maintain parking lots, loading docks and other paved surfaces. No project is too big or too small.
Our team works hard to deliver great results, using tried and true techniques while handling every detail of your project. We don’t cut corners or skimp on quality! In addition to asphalt sealcoating in Tampa, we’re available for parking lot striping, re-striping, stencils, bollard installation, concrete stop installation and more.
Let us help you take care of your pavement! Call Line Striping of Tampa Bay today at (727)800-5987 to get your free quote. You can also use our online contact form or email contact@paintmyparkinglot.com.
